Jump to content

EMD FP45

From Wikipedia, the free encyclopedia
EMD FP45
Type and origin
Power typeDiesel-electric
BuilderGeneral Motors Electro-Motive Division (EMD)
ModelFP45
Build date1967-1970
Total produced14
Specifications
Configuration:
 • AARC-C
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Wheelbase45 ft 0 in (13.72 m)
Length72 ft 4 in (22.05 m)
Prime moverEMD 20-645E3
Engine typeDiesel
Cylinders20
Performance figures
Power output3,600 hp (2,680 kW)
Career
OperatorsSanta Fe, Milwaukee Road, and BNSF
LocaleWestern United States
DispositionSix preserved in museums, two wrecked, one sold to Wisconsin Central, remainder presumed scrapped

The EMD FP45 is a cowl unit type of C-C diesel locomotive produced in the United States by General Motors Electro-Motive Division (EMD). It was produced beginning in 1967 at the request of the Atchison, Topeka and Santa Fe Railway, which did not want its prestigious Super Chief/El Capitan and other passenger trains pulled by freight style hood unit locomotives, which have external walkways.

History and development

[edit]

The EMD SDP45 was a good passenger locomotive, but to the Santa Fe Railway it did not look the part. EMD therefore designed a lightweight "cowl" body to cover the locomotive, though it did not, as in earlier cab units, provide any structural strength, which remained in the frame. The cowl provided sleeker looks, better aerodynamics at speed, and allowed the crew to enter the engine compartment en route for diagnostics and maintenance. Final drive gear ratio for passenger service was 57:20.[1]

Orders

[edit]

Santa Fe purchased nine of the locomotives (road numbers 100 through 108), and the Milwaukee Road bought five for its passenger service (road numbers 1 through 5). The Milwaukee Road units were delivered without dynamic braking. Reportedly, Illinois Central Railroad was considering an order for five FP45s as well (EMD order #5742, serial #s 34952–34956), but canceled it. Such low production was feasible and profitable for EMD since the locomotive was fundamentally just a re-clothed SDP45. Power, as in the SDP45, was from a V20 645E3 engine (or prime mover) developing 3,600 hp (2,680 kW).

Derivatives

[edit]
ATSF 100 and 102 with the Super C in January 1968
Control stand of ATSF 108

A freight-only derivative, the EMD F45, was sold in greater numbers (86) to Santa Fe, the Great Northern Railway, and the Burlington Northern Railroad. Amtrak bought a similar passenger locomotive based on the 3,000 hp (2,240 kW) SD40-2, the SDP40F. After the failure of the SDP40F, Amtrak traded 18 units to the Santa Fe, where they were converted for freight use. The converted locomotives were designated as SDF40-2.

The last three F45s in service were on the Montana Rail Link and the New York, Susquehanna and Western Railway in the northern and northeastern United States. These units were taken out of service in 2006 for the MRL and 2010 for the NYSW. Three are known to survive, with one located at the Izaak Walton Inn, now converted into a lodge. [citation needed]

Rebuilds

[edit]

Between April 1980 and December 1982, Santa Fe's San Bernardino shops rebuilt eight FP45s 5940–5943, 5945–5948. They emerged as 5990–5993, 5995–5998, and were redesignated SDFP45s. The 5944 was retired in September 1981 on account of a wreck at Toland, Texas. Electrically they were upgraded to SD45-2 standards. Mechanically, they were re-geared from 59:18 to 60:17, reducing their top speed from 89 to 83 mph (143 to 134 km/h).

In the mid-1980s Santa Fe again re-geared them - this time to 62:15 for 71 mph (114 km/h).

Withdrawal

[edit]

Milwaukee Road's FP45s were all sold for scrap in 1981 and 1984. Santa Fe SDFP45 No. 5944 was wrecked in 1981, Santa Fe SDFP45 No. 96 was wrecked in 1994 on Cajon Pass. While No. 91 was sold to the Wisconsin Central in January 1995, becoming their #6652 and the rest stayed in service right up until the BNSF merger in 1996, and were retired shortly after the merger.

Preservation

[edit]

Those that were not wrecked in service, or sold to other railroads, are on display in museums:

See also

[edit]

References

[edit]
  1. ^ "Santa Fe F45's". atsf.railfan.net. Retrieved 3 August 2021.
  2. ^ KWCH Staff (2023-09-25). "Actor leading Wichita museum's effort to restore Santa Fe locomotive". www.kwch.com. Retrieved 2023-09-26.
  3. ^ Busse, Dave (8 October 2018). "Santa Fe 'Warbonnet' FP45 comes alive in California". Trains.com. Perris, CA: Trains Newswire. Archived from the original on 10 October 2018. Retrieved 12 February 2024.
[edit]