Talk:Magnetic-core memory

Type of Ferrite Material Used

Does anyone know what type of ferrite material was used for the rings? Common types are 43 material, 61 material, and 73 material. 75.164.242.189 (talk) 01:23, 13 April 2009 (UTC)

Material with a square hysteresis loop. (I don't know about catalog numbers.) Ask if you need more info. Regards, Nikevich (talk) 06:25, 19 June 2009 (UTC)

It wasn't only iron ferrite in use for core, semi-precious stones were used as well. I once handled a core board at Computer Parts Barn in Asheville, NC and saw a rose glint. It was a beautiful board, a sandwich of two clear plastic sheets with the cores in between. Each core was a ruby rod. — Preceding unsigned comment added by Jeffrey S Worley 50.250.75.105 (talk) 19:46, 6 October 2020 (UTC)

I rather doubt that, given that ruby is not ferromagnetic let alone square-loop. On the original question, those numbers you mentioned are ones commonly used for transformer type ferrite, which is linear (approximately) rather than square-loop. Those ferrites have no memory properties and don't work in core memory at all. Paul Koning (talk) 15:21, 3 February 2023 (UTC)

Core plane image

Kudos to Sanders muc for contributing the core scans. :-) Would you be able to count the lines (and number of cores) in one direction so we could calculate the memory capacity in bits & bytes for the plane shown? It would give the article even more educational value if the readers were able to immediately compare core to semiconductor RAM chips in that parameter, I think. --Wernher 16:07, 2 May 2004 (UTC)

Ok, I counted them. Its an array of 128x128 rings, totalling to 2 KiB. Is there, BTW, a way to get a caption under an image without the "thumb" option? Sanders muc 09:31, 3 May 2004 (UTC)

Yes, I fixed it, at least temporarily. What I'd really like, for consistency, is a captioning scheme looking just like the thumb & caption scheme but without the thumb option. However, I haven't found this yet. --Wernher 20:17, 5 May 2004 (UTC)

"framed"? — Omegatron 13:54, 24 March 2007 (UTC)

Another image (by Andreas Feininger ?), from the Google Life Magazine archive LIFE Sage Air Defense System - Hosted by Google - "For personal non-commercial use only" - I haven't read the fine print ... --195.137.93.171 (talk) 12:12, 25 December 2008 (UTC)

I've recently been opening up and nondestructively measuring the core memories I have access to. I've put the results on the web at http://www.cs.uiowa.edu/~jones/core/ if anyone's interested. My oldest sample was from the early 1960s, with 1.96 square mm per bit and cores 1.96 mm outside diameter. My newest is from a product designed in 1974 made in 1977, with 0.13 square mm per bit and cores 0.46 mm diameter. If someone thinks I should upload any of the photos on that web site to Wikimedia Commons, just tell me which ones you think are worth it. Douglas W. Jones (talk) 19:26, 6 March 2019 (UTC)

Closeup image

The caption says the distance between the cores (rings) are 1mm. Eh -- which distance, the short one between cores in a 'quad-core group', or the long one, between cores in different groups? --Wernher 02:06, 8 May 2004 (UTC)

• Well, sort of the middle between them. Its only a rough estimate. Maybe I take a magnifying glass with me to check. By the way, the quad groups don't have anything in common. It's only due to mechanical strain in the wiring. Sanders muc 11:34, 9 May 2004 (UTC)

"The light color vertical and horizontal wires are X and Y wires, the diagonal wires are Sense wires, the dark colored horizontal wires are Inhibit wires."

What diagonal wires?? — Omegatron 01:48, 18 March 2007 (UTC)

Exactly what I was going to ask. Even at the full resolution I can't see any diagonal wires. --Zero^talk 06:21, 29 April 2007 (UTC)

There are no diagonal wires in this core plane as it is a "2-wire" plane, not the "4-wire" plane in the photo originally shown when the caption was written. Someone changed the photo. Note: a "2-wire" memory does not use X-Y addressing as discribed in the text. It uses word line addressing (probably the thicker wires) and multiple bit line sense/inhibit wires (probably the thinner wires). I wish someone would change the photo back so it matches the text and caption. -- 205.175.225.22 (talk) 00:30, 30 January 2008 (UTC)

Unfortunately the previous image "Core2.jpg" has been deleted from both Wikpedia and Commons. Qwfp (talk) 12:50, 30 May 2009 (UTC)

The current picture is quite misleading, because it shows a CDC 6000 series 4k memory plane, and an inset drawn as if it were a magnified part of that array but showing something different entirely. That insert is presumably "linear select" memory; it might be a picture of CDC 6000 series ECS.

The 6000 series main memory actually has one more wire than usual; it uses a pair of inhibit wires rather than just one. The reason is not given in the documentation; I suspect it is for speed, reducing the inductance of the inhibit lines and thereby allowing for faster pulses with available drive circuitry. Paul Koning (talk) 15:30, 3 February 2023 (UTC)

As the image exists now, there's the statement ""The light color vertical and horizontal wires are X and Y wires, the diagonal wires are Sense wires, the dark colored horizontal wires are Inhibit wires." This is incorrect; it refers to an earlier image, it seems. The inhibit wires must be the irregular (twisted?) red-orange vertical wires, because their flux cancels the flux of the addressing wires for that plane. Regards, Nikevich (talk) 06:30, 19 June 2009 (UTC) → (Update): I re-wrote the caption; I trust that the Y lines are vertical in the image. Nikevich (talk) 07:10, 19 June 2009 (UTC)

Core in Star Trek

I would like to add this to Core Trivia:

• In Star Trek, computer memory devices are called Memory core, interestingly similar to Core memory.

But, it looks like a POV problem. Especially that I'd love to say how core and memory are being misused there... Now what do you think could be said here about the subject? And where could I criticize that misuse? :) --Arny 08:19, 23 October 2005 (UTC)

I don't know if it belongs in trivia, but I've noticed - with the introduction of multiple processor Intel Core chips - that folks are starting to use the term "core" to refer to processors rather than memory. E.g. webopedia entry. Michael Daly 21:00, 14 January 2007 (UTC)

Curie point

The temerpatures quoted in the article seem to be waayyyy too low to me. My understanding was that the core was heated up to close to the Curie temperature, which I thought was 450 degree Kelvin (!) (or something like that) for ferrite cores. That would be around 300 or 400 degrees farenheit. The point of getting the core so hot was in order to minimize the switching time: the magentism of the cores could be flipped much much faster, if it was held close to, but just below, the Curie point. Yes, this means that you'd have an oven in the air-conditioned glass room. But I remember working with these things: two full-size boxes (five feet high, 3 feet wide), with 16KBytes in each box, and these had burnt-looking metal and asbestos poking out everywhere if you opened the front sheet-metal door. Surely my memory is not that bad...

In general, I think the article needs a section on switching speed and the Curie point. Unfortunately, I am not qualified to add this. linas 03:06, 27 November 2005 (UTC)

Core memory was NOT operated at anywhere near the Curie temperature. The switching time is relatively independent of temperature, though the required current is not. For a technical description of the operation of a typical late 1960s/early 1970s core memory subsystem, see DEC MM11-E Core Memory Manual (PDF).

The earliest core memory systems were not temperature compensated, so they were heated, but to temperatures well below 100C. The reason for heating was only to maintain a constant temperature such that a fixed drive current could be used. --Brouhaha 09:45, 12 November 2006 (UTC)

That sounds right. I remember our IBM 1620 (early 1960s vintage machine) having to warm up its core memory as part of power-up. Paul Koning (talk) 21:12, 9 April 2008 (UTC)

Other Forms of Core Memory

This paragraph makes no sense to me:

Another form of core memory called core rope memory provided read-only storage. In this case, the cores were simply used as transformers; no information was actually stored magnetically within the core.

How does it work and why is it called memory if no information is stored? Landroo 02:56, 13 April 2007 (UTC)

See the article on core rope memory; the information was stored by weaving the various "word lines" inside the core (for example, for a "1") or outside the core (for a "0"). So the information was stored by the person who originally wove the word lines (assembled the memory system), but wasn't stored in the various "bit cores" per se.

Atlant 13:17, 13 April 2007 (UTC)

This article as well as the core rope memory article are wrong to claim that linear (not square loop) cores are used in rope memory. In fact, rope memory relies on the storage properties of the cores, but in a different way than RAM. I'm working on an update. In doing the research, I just found an MIT report from 1960 that mentions the inventor of core rope memory: one "Olsen of Lincoln Labs". That would be Ken Olsen, founder of Digital Equipment Co. Paul Koning (talk) 22:13, 21 January 2017 (UTC)

Writing to Core Memory

Could someone with the knowledge please explain the following section:

Writing is similar in concept, but always consists of a "flip to 1" operation, relying on the memory already having been set to the 0 state in a previous read. If the core in question is to hold a 1, then the operation proceeds normally and the core flips to 1. However if the core is to instead hold a zero, a small amount of current is sent into the Inhibit line, enough to drop the combined field from the X, Y and Inhibit lines below the amount needed to make the flip. This leaves the core in the 0 state.

Is this section talking about normal writing or the "write-after-read cycle"? If it is normal writing, I makes no sense to me why you would just flip to 0 or 1. If it is the "write-after-read cycle" it makes much more sense, but I don't think that is clear from the text.

Bajsejohannes 18:45, 24 July 2007 (UTC)

There is no "normal writing" as you refer to it. Core memory always operated on a "read/write cycle", where the write always followed a read - therefore the word was all 0 state when the write phase of the cycle began. If the data read was not needed, it was simply ignored. -- 205.175.225.22 (talk) 00:07, 30 January 2008 (UTC)

Use of Ferrite Core Memory

• "Since modern semiconductor, random-access memories are usually volatile, older technology memories such as ferrite core continue to be used on spacecraft." —Preceding unsigned comment added by Parallelized (talk • contribs) 23:07, 28 January 2008 (UTC)

Speed

The memory speeds given in the article don't match the state of the art. In 1964, CDC (in the 6600) has 1 microsecond cycle time core memory. Paul Koning (talk) 01:13, 24 March 2008 (UTC)

Some other parameters differ, too. Read/write current in that memory was 200 mA. Paul Koning (talk) 14:31, 10 April 2008 (UTC)

Shaking the core to bits (or shaking the bits in the core)

Alas, the reference I have for this piece of information is not on the web - it's in the private papers of Richard Brent (scientist), who is the person who wrote the program that was able to make the core frame rattle in waves, causing it to destruct. The next time I'm there, I'll find the exact date for the reference, but it was during his doctoral research in Stanford in the late 1960s.

Would that be suitable reference, and not regarded as an "Urban Legend"? If so (I'll give it a week) I'll restore the line under "trivia".

Reynardo (talk) 15:02, 9 April 2008 (UTC)

It's not a very accessible reference, is it? Don't know what other Wikipedia editors think but I'd find this one hard to accept. Look at the Wikipedia policies on reliable sources and see if this would qualify. I don't know a whole lot about core memory and so I don't understand how it would work. There should be darn close to zero leakage flux between the cores. And the currents in the wires are only a couple of amperes, so how much force could there be between the wires? The wires don't run parallel with each other for great distances - you want to avoid that for cross-talk reasons. Trivia sections are discouraged, anyway. Was there ever an engineering bulletin or advisory put out to users not to do this? The more I think about it, the more dubious it sounds. --Wtshymanski (talk) 17:55, 9 April 2008 (UTC)

I don't buy it either, not without a published reference from a reliable source.

I was familiar with the PDP-1, the TX-0, and the LINC, all of which date from the early days of core memory. There were no audible sounds coming from the core memory. At least the first two were in hacker environments where any such characteristics would have been noted and exploited for their amusement value.

Programs to play crude tunes on almost every computer in almost every conceivable manner (chain printers... of course, the built-in speaker on the LINC... the "harmony compiler" on the PDP-1) existed. If core memory could be made to vibrate physically, it's just not conceivable that this wouldn't have been widely known.

I concur with Wtshymanski seat-of-the-pants judgments about the sizes of the currents and the forces involved.

Some branch of the military made heavy use of "magamps" and magnetic-cored-based computing elements in the days before transistors were available, and generally speaking I thought of core memory as being rugged, not fragile.

I heard (but never witnessed) of a hack that made core memory in an IBM mainframe... probably a 709 or 7090... generate RFI that produced harsh but recognizable tunes if a transistor radio was placed nearby. I find this believable. Perhaps the urban legend is derived from this. Dpbsmith (talk) 20:21, 9 April 2008 (UTC)

From how it was explained to me (as this is not my area of expertise) the core memory is written by flipping the ring on the pair of wires from one side (0) to the other (1). The program worked by having the rings flip in physical sequences, so that the flip moved like a well-synchronised Mexican wave, causing waves of movement across the frame. By having the waves timed to cause peaks and troughs in the right frequency, the frame would start to shake. It wasn't current leakage, nor was it to do with localised music - it was wholly and solely a physical co-ordination of the rings.

I appreciate that the source is not highly accessible, but I'll check with Dr R. Brent next week about what form the notes take. It may well turn out to be primary level laboratory notes, which ought to be allowed. As to it being trivia, that's a difficult one to judge. Where does one draw the line between information that might be of use, and trivia? Reynardo (talk) 16:58, 12 April 2008 (UTC)

You say: "from how it was explained to me (as this is not my area of expertise) the core memory is written by flipping the ring on the pair of wires from one side (0) to the other (1)."

This is not how core memory works. There is no physical or mechanical motion of the cores. All that changes is the direction of magnetization inside the core. It is purely electronic, and there are no moving parts. Dpbsmith (talk) 22:56, 12 April 2008 (UTC)

*sigh* Then I shall pin this source down and BEAT HIM for spinning me along on it. Reynardo (talk) 06:07, 13 April 2008 (UTC)

A Core Memory Designer Tells it as it Was!

I designed core memories from 1960 to the early 70s, and memories with early semiconductors, such as the Intel 1103.

Core sizes in my time went from 80mil (2mm) OD, down to 14mil. Various mixes of materials were used to get a good square loop and small amounts of Lithium were included in later cores. These Ferrites were very different from those used in transformers, but had commonality with mag-amp cores. In 1966 I designed a 16KB memory with 250nS access and 750nS cycle times, which was successfully manufactured for a number of years. In the UK these were known as "stores" rather than memories.

This memory used 22mil cores; X, Y, and Inhibit currents were about 400mA, and the sense output for a "1" was about 40mV peak. To establish the currents with 50nS rise times needed about 35V drive voltage, and the windings were treated as matched transmission lines to achieve clean waveshapes. Later smaller cores could use smaller currents, at the expense of a lower sense voltage.

Sensing was an art, as the signal was accompanied by a large common mode disturbance, and during a "0" write cycle a differential signal of at least a volt. It was necessary to sample the sense output at the right time to get the best signal to noise ratio.

Continual reading and writing a "1" caused the core to heat up due to hysteresis losses, reducing the operating tolerances. A well designed memory with currents temperature compensated would work with currents varied over a range of +/-10%, although we would control them much tighter than this.

The cores did change shape very slightly when switched due to magnetostriction effects. Military memories were encapsulated to withstand shock and vibration, but the encapsulating medium had to be elastic to allow magnet-striction to happen, otherwise domain reversal couldn't take place.(Epoxy was too rigid, silicones were preferred).

As semiconductors came in as a competing technology, the core memory exhibited "Sailing Ship Syndrome", as manufacturers managed to make them smaller, faster, and cheaper, with larger capacities. The Intel 1103 DRAM chip (1KBit) produced a system that was just inferior to the best core systems, but need a refresh system to update the volatile cells, requiring the memory to be interrupted for about 2% of the time.

4Kbit semiconductor memory chips sounded the deathknell of the ferrite core for most applications.Contributing factors were the complexity of the core memory drive and sense circuitry, and the size and complexity of the power supply systems.

CharlyGaul (talk) 19:25, 8 May 2009 (UTC)

Manufacturing

It would be great to add a section on how the memory modules were made. When I worked at ITL in the UK (formerly CTL), the story was that core memory was hand-woven by little old ladies in Wales who used to make lace before lacemaking became automated. I think that's pretty fascinating... 76.195.252.202 (talk) 15:46, 24 July 2009 (UTC)

An old technician's lament

If I had forseen it, I would have saved so much of my old references for use on Wikipedia. I have maintained machines that were amazing achievements at the time. This article brings to mind one of them: a disk emulator device with a half a megabyte of core memory on a single card. It was very large (I seem to remember about 2.5 feet by about a foot by nearly an inch thick), and was in fact two cards that sandwiched the cores. One failed and we opened it, and the core area just looked like black cloth. The card was 8 bit plus parity, so I was looking at an area with over 4.5 MILLION cores. I wish I still had the documentation on that one.Murasaki66 (talk) 03:15, 4 September 2009 (UTC)

The largest core memories I've run into are the ECS ("Extended Core Storage") on CDC 6000 series mainframes. A max size ECS, such as was used on the University of Illinois PLATO system, was 2 million 60-bit words, so about 120 million cores. Paul Koning (talk) 22:16, 21 January 2017 (UTC)

Magnetic Ceramic?

Noticed the article says "uses small magnetic ceramic rings" in the 2nd sentence. Is that correct? I know they are made of ferrite, as mentioned later in the article. I know many look very ceramic, but to my mind that seems to be due to encapsulation in paint or similar. Could someone put me right if they ARE ceramic and explain a little. I actually repaired these things back in ≈1989-1992! --220.101.28.25 (talk) 07:02, 2 January 2010 (UTC)

According to Wikipedia itself "A ceramic is an inorganic, non-metallic solid prepared by the action of heat and subsequent cooling". Ferrite is surely metallic. Might be splitting hairs but I would like this to be expalined if possible. --220.101.28.25 (talk) 09:17, 2 January 2010 (UTC)

Ferrites aren't conductive and aren't metallic. --Wtshymanski (talk) 15:38, 2 January 2010 (UTC)

Wrong. On both counts. The magnetic constituent of ferrite is iron which is most definitely a metal. Ferrite is basically a crystaline form of iron often with other ingredients added. Ferrite as it is normally encountered would appear to be non conductive, but this comes about because it generally has a non conductive 'skin' due to surface changes to the material, but also because the matt surface doesn't provide a good contact surface. If you were to polish the end faces of a piece of ferrite material (such that they look like a mirror) and then plate a metalic surface such as silver (which can be deposited chemically), to those mirrored faces, the ferrite will have a fairly low resistance. 109.145.22.224 (talk) 09:52, 29 April 2012 (UTC)

Iron is a metal. Iron oxide is not. Sodium is a metal. Sodium chloride is not. Klaus Finkenzellar in "RFID Handbook", Wiley, ISBN 0-470-84402-7 page 108 says in part

Ferrite is the main material used in high frequency technology. This is used in the form of soft magnetic ceramic materials (low Br), composed mainly of mixed crystals or compounds of iron oxide (Fe2O3) with one or more oxides of bivalent metals (NiO, ZnO, MnO etc.) (Vogt. Elektronik, 1990). The manufacturing process is similar to that for ceramic technologies (sintering). The main characteristic of ferrite is its high specific electrical resistance, which varies between 1 and 10⁶ ohm m depending upon the material type, compared to the range for metals, which vary between 10⁻⁵ and 10⁻⁴ ohm m....

--Wtshymanski (talk) 16:53, 30 April 2012 (UTC)

At the very least you could pop over to Ferrite (iron) which shows up you usual lack of knowledge on the subject. 109.145.22.224 (talk) 10:24, 2 May 2012 (UTC)

Not relevant. That usage of the word is not the normal one and not what is discussed here. Look instead at Ferrite (magnet) which talks about the iron compounds called "ferrite" that we have here. Paul Koning (talk) 15:38, 3 February 2023 (UTC)

Same word, yes, but two different meanings. You are of course familiar with the difference between different allotropes of iron, and a *chemical compound" of iron with other substances. I conclude you are only trying to bait me. --Wtshymanski (talk) 13:33, 2 May 2012 (UTC)

And did you see Ferrite (magnet) ? Very illuminating. --Wtshymanski (talk) 13:35, 2 May 2012 (UTC)

If I may kibitz: Anon above says that if we file away a ferrite core and plate a conductor to it, it is conductive. Does that prove something? Besides, conductivity is not in the definition of "metallic" used above, and in fact you'd just as soon not have memory cores be conductive anyway. Spike-from-NH (talk) 00:49, 3 May 2012 (UTC)

Why is non conductivity a desireable feature? Maybe in case the wires lose their varnish and touch perhaps? But ferrite in its natural state has a natural non conductive layer (from interaction with the air). 109.145.22.224 (talk) 15:54, 3 May 2012 (UTC)

Consider the Eddy currents when trying to rapidly change a 1 to a 0 (or, really, just reading the core). --Wtshymanski (talk) 16:48, 3 May 2012 (UTC)

And that is a problem how? 109.152.145.86 (talk) 12:34, 4 May 2012 (UTC)

If ferrite is non conductive, as you claim, where do you believe that the eddy current (iron) losses come from in a ferrite cored power transformer (such as you might find in Switch mode power supply) 212.183.128.200 (talk) 15:50, 3 May 2012 (UTC)

Wtshymanski will have one of 2 answers for that (based on his complete lack of knowledge of the subject). My money is on the first of my possibilities, but it doesn't matter, either will be wrong. 109.145.22.224 (talk) 15:52, 3 May 2012 (UTC)

Ferrite (the ceramic) is non-conductive but doesn't get rid of the hysteresis loop, which is another phenomenon altogether. --Wtshymanski (talk) 16:48, 3 May 2012 (UTC)

You didn't answer the question. What causes the eddy current losses in ferrite cored transformers? 109.152.145.86 (talk) 12:34, 4 May 2012 (UTC)

So, Anon, are you here to help improve the article's wording? or merely to achieve "pwnage"? Spike-from-NH (talk) 16:39, 3 May 2012 (UTC)

Improve the article, but persons with little knowledge such a Wtshymanski don't help. He is an established disruptive editor, that once he has made a claim won't admit that he got it wrong. 109.152.145.86 (talk) 12:34, 4 May 2012 (UTC)

A conductive ring, being a conductor, will experience eddy currents when you try to rapidly change its state of magnetization; this dissipates energy in the resistivity of the metal, and also slows down the switching time, important when you're trying to read out a 1 or 0 in less than 1000 nanoseconds. The effect is important even at very low power frequencies, since early experimenters rapidly realized motors and transformers didn't work very efficiently with solid iron magnetic circuits; even a DC motor has the rotor made of stacks of laminations. Although they are only very lightly insulated from each other, the alminations limit the area enclosed by changing magnetic flux and so limit the magnitude of eddy currents induced.

You don't have eddy current loss in a ferrite core, because the material has a high resistivity so there's high resistance to current flow. You still have hysteresis losses in a ceramic core, though, but that's due to the magnetic domains in the ferromagnetic crystals moving about and swapping ends as the field changes. --Wtshymanski (talk) 13:14, 4 May 2012 (UTC)

I am the first to criticize Wtshymanski when he is wrong, but he isn't wrong on this.

Aluminum is a metal. Rubies and Sapphires (also known as "Aluminum Oxide") are not metals. Ferrite is not a metal. Ceramics are not metal. Magnets don't have to be made out of metal. Magnets do not need to be conductive. Some magnets are made out of ceramic.

IP editor, you are wrong on several points. Let's start with one: You claim...

"Ferrite as it is normally encountered would appear to be non conductive, but this comes about because it generally has a non conductive 'skin' due to surface changes to the material, but also because the matte surface doesn't provide a good contact surface."

...and...

"If you were to polish the end faces of a piece of ferrite material (such that they look like a mirror) and then plate a metallic surface such as silver (which can be deposited chemically), to those mirrored faces, the ferrite will have a fairly low resistance"

Why don't you try it? No need for plating. Simply take a fairly large ferrite ring, snap it in half, quickly stick the two end of the "U" in separate dishes filled with salt water, and measure the resistance. Then try the same thing with a "U" shaped piece of iron or copper. Do the experiment and tell us what your measurements were. --Guy Macon (talk) 17:59, 15 May 2012 (UTC)

Issues of bias

I've just reverted a whole bunch of edits by Ggordonbell as near-CoI. Although Cgordonbell is not directly involved he is clearly acquainted with people that are and it has raised the usual CoI issues of bias. Perhaps most notable of these issues is the denigration of Viehe's work. My understanding is that it relates primarily to the implementation of logic gates using cores rather than actual memory. However, memory can in turn be implemented using gates and and it seems clear that this was in fact done. There portraying it as a complete irrelevance simply because a later innovation worked differently is misleading.

There are similar issues elsewhere - the one that catches my eye is the assertion that the write-after-read cycle was devised in 1951 as part of core memory memory development. This is clearly not true: it goes back at least as far as the Williams tube in 1948 and quite probably earlier.

This is not to say that Cgordonbell's input is not welcome, nor am I challenging his integrity. We simply have to bear in mind that personal recollections of event that happened 60 years ago may not be the most accurate thing to rely on. Even current personal testimony can be problematic since those directly involved in a project only ever see it from their own perspective and are less aware of the activities of others working in the same field. For this reason a personal email can never be relied on as a source for a quote and we need to be extremely vigilant when these kind of issues arise. Crispmuncher (talk) 16:05, 13 April 2011 (UTC)

You also reverted a number of edits which seem uncontroversial improvements. That is rather impolite. Are you planning to restore those? —Ruud 17:13, 13 April 2011 (UTC)

I was going to say "No, the onus is on the potentially CoI editor to raise issues on a case-by-case basis". However, I now note that the read-rewrite error is long-standing and not in fact recently introduced so I'll plead mea culpa and give him the benefit of the doubt and re-introduce the less contentious stuff. Thinking about it ISTR I have the perfect source for Viehe-related stuff. I'll try digging that out so it may be a couple of hours before I get around to it. Crispmuncher (talk)

None of my edits have anything to do with my own 60 year recollection. I only go back 55 years to programming the 650 and Whirlwind at MIT and then programming the English Elecric Deuce that Turing designed see papers on my homepage. I then turned to hardwdare at Digital Equipment with a 6 year sojourn as a faculty member at CMU.

I think Forrester's recollection in that email is worthwhile and wish that as a respected inventor and scholar we could quote it. I think he has earned the right. If there's a way, I would like to enter it, but I'm Ok omitting it and as a result having a drier less human story. Primary sources are gold as they are direct. All these issues we are discussing come because we do not have primary sources and have to imply so much and so much causality. No doubt somewhere in court records or wherever what he wrote to me earlier this month when I ask him about the connection is true, but the Papian quote re. "Yes we were all looking at cores" is good enough. Cgordonbell (talk) —Preceding undated comment added 09:04, 14 April 2011 (UTC).

Alright, I reverted your revert, as this is really a very, very bad way to interact with new editors, who are clearly willing to communicate you. Could you instead provide some concrete comments on that additions with which you disagree? —Ruud 20:18, 14 April 2011 (UTC)

I disagree. BRD is a normal editing process and POV needs stamping on when found. I feel it best to eliminate the entirety when it is encountered: new material can be added as it is discussed and considered but subtle POV can at times be difficult to identify. You can disagree with that if you like but I reject the accusation that this is shoddy practice.

OTOH I do apologise for not making those edits I referred to above. As I noted I went off to find a reference and my internet went down while I was doing it. Turns out that reference is a duff one anyway: it refers to Maurice Karnaugh's work with magnetic core threshold gates. Crispmuncher (talk) 21:28, 14 April 2011 (UTC)

Sure, that works very well for experienced editors. For well-intentioned new editors this can be a little intimidating, however, and we should try be a little more courteous. —Ruud 22:07, 14 April 2011 (UTC)

Magnetic-core memory History Section, suggested modifications: PLease HELP Me!

Dear Rudd and Crispmuncher, I am happy to write this note about each of the changes I made, but I do not like the implication that I had any other motive, or COI, when it comes to the getting the facts right and making the story interesting. I would like to appeal that this discussion is not a COI and should be retitled as History, I have just been trying to make the core memory history entry correct, especially since I was on the Wang Institute Board of directors and knew An Wang and have known Forrester for 50 years. Some issues I’ve tried to clarify the Core Memory history section. From the 3 patents, I have the utmost respect for Viehe and his clever circuitry and later work on core memory manufacture, but long after the core memory was invented. This is just background that I know or have known 3 of those mentioned, including Ken Olsen cited in a patent...he was my boss when I headed R&D at Digital Equipment Corp. Each suggested change is backed with citation and I don't think there are any loaded words or unsubstantiated statements e.g. Forrester learned from Wang.

• Please note that the topic, Magnetic Core Memory is stated in the first sentence. Neither Viehe or Wang are relevant unless cited links can be shown! I have no problem that they are included, but with clarity as to what they did even though I BELIEVE IT LACKS RELEVANCE TO THE TOPIC.
  • Magnetic-core memory is an early form of random-access computer memory.
• E.g. the statement of “Wang patenting while Woo is ill” just has to be cited, and if such it does cast a light on An. It is by implication a nice attack on the integrity of Wang. But mostly I really want the history to be correct including having the citation especially the ad hominems.
• No attack on Viehe (I don't do that… and why I would like this attack on my own integrity to be relabeled as a discussion of the Core Memory History section) and why I listed his 3 relevant patents: the first two were on using core's for digital systems design and the later one for manufacturing. The patent titles tell the story. There was a short era, Magnetic Era, in the 50s that was AR (after relays) and BT, BC (before transistorized logic and before computers) that traffic controllers and other complex systems were built in a hard wired fashion. (Our DEC PDP-8 ended this by 1965 when complex systems were built from computers. SRI patented some of this technology and a computer was constructed using cores as the logic elements also SRI lists several impressive systems built using their core logic. See http://www.sri.com/work/timeline-innovation/timeline.php?timeline=computing-digital#&innovation=all-magnetic-logic-computer and listen to http://data.computerhistory.org/dspicer/crypt/Hew_Crane_SRI_Mag_Logic_Computer/hew_crane_10_22_2004_ds.mp3 I did not add or subtract any notion of causality re Viehe re the Core Memory. I believe there is none, but I wouldn’t dare tackle this. I do believe the article must somehow separate the use of core for storing a 3d array of bits and cores used for constructing logic i.e.. using “ands” and “ors”.
• “Frederick Viehe first patented magnetic core memory in 1947, having developed the device in his home laboratory” is probably the most misleading statement that can be made regarding the core memory, not core transformers for logic. This is what comes up when you do a search and it is so, so wrong... if you assume memory => store a reasonably large number of bytes. If I could figure out who really cares about this page and history, I would like to suggest that unless they can cite a connection, it could be removed. As long as the statement is correct re. logic vs. memory aka storage, then no harm is done except the general public will assume that Viehe played a role in the 3D core memory store.
• I concluded by reading the title of the page, that this is about the history and use of the 3D core structure as in say a PDP-8 that had 12, 4K x 4K planes to given an array of M(0:4095)<0:11> or 4K, 12 bit words. This was my comment on Viehe's 2 patents had nothing to do with storing bits as in an array, any more than Faraday's observation that transformers were magnetized with DC. I did not remove Viehe' entry, only made it correct even though I don't think it is relevant.
• I made the comment that Wang created a shift register for use with core logic, creating a one word wide, serial memory of M(0:~32)<1> or about 50 bits. Again, nothing to do with the 3D core memory as there was no way to scale it to be competitive or useful as a memory array. This particular shift register is in the Computer History Museum and was given to me in or around 1980 for the Computer Museum in Marlboro by a person who worked for me, who got it from his father-in-law, a Harvard janitor working in and around the Aiken lab where Wang had worked.
• Walker patent is a red herring that I stated that it was a cross-point switch. U.S. Patent 2,667,542 "Electric connecting device" (matrix switch with iron cores), filed September 1951, issued January 1954 — Preceding unsigned comment added by Cgordonbell (talk • contribs) 09:55, 14 April 2011 (UTC)
• Two comments I think were of general interest:
  • Since there was a comment that Wang got 500K, I wanted to point out that Forrester got 13M for his patent. Viehe got 500K from IBM I believe, but should be checked, and the patents were assigned to IBM. It might have been for use in their electromechanical systems that used relays prior them using vacuum tubes, but we should not conjecture!
  • I put in the nice quote that relates to invention directly from Forrester on the seven years to convince industry to use, and seven to convince them they didn’t invent it. There is no reason to have only dull stuff, facts, etc.. This to me says a lot about the difficulty for inventors and is nice to read and that engineers understand and appreciate and will quote.
• Note that I changed the entry saying that Forrester got whatever from Wang is a statement I wanted to clarify because there is NO citation for it and I happen to believe it is wrong. That statement in effect seemed to be made by this reasoning: Wang and Forrester worked in the same town and patented stuff that employed magnetic cores. Wang filed before Forrester. Therefore Forrester got his idea from Wang. I have three comments to address the origin of the idea.
  • The statement: "Jay Forrester's group, working on the Whirlwind project at MIT, became aware of this work." should be substantiated. — Preceding unsigned comment added by Cgordonbell (talk • contribs) 12:33, 14 April 2011 (UTC)
  • Forrester is cited in Annals of Computing History Interview as a first hand recollection c1975 that is a beautiful account of the invention.
  • Forrester’s work and background is well documented starting with the Journal of Applied Physics. I cited the article in The Computer Museum Report where Papian, who actually built the first memory for Whirlwind, and spoke about the connection between Wang and Forrester that I believe is essential to the story.
  • [3] Email from Jay Forrester to Gordon Bell regarding the co-incident current core memory invention. I got this email from Jay that was left quoted, but I can understand why that is not applicable and want to find out how I can get a statement from Forrester to be entered now. That may be a potential problem, but is Jay's problem. We must value SIGNED primary sources! We are asking something from the inventor... and all are suspect, but at least you have it from the inventor who did it and it is signed. How do I get the statement in the email entered into Wikipedia?

As someone who uses Wikipedia, contributes $ to it, and now is trying to make a serious entry. I also encourage all my friends who use it, yet won’t correct the parts that they are expert in, to work to make it right. Based on this experience I may be forced to agree with them and Wikipedia will have gained another strong voice of dissenters. As a minimum, it is clear that I am unwelcome.Cgordonbell (talk) —Preceding undated comment added 08:22, 14 April 2011 (UTC).

Rudd and Crispmuncher, At this point, it seems like I should just go away as I have made some careful, considerate changes that were deleted and worse yet accused of being conflicted and biased even though I have stated no personal opinions... and by implication unqualified to write aboout history even as a founder to The Computer Museum in 1975 that begot the The Computer History Museum. I was involved in the collection of many core artifacts including both the Wang shift register and Forrester co-incident current memory.

Please confirm that I am persona non grata as a newby, should disappear in order that you older Wikipedians can continue to create your own history based on random factoids, loosely held together with some suppositions and accusations, of which this page is, I hope, just an outlier. I truly would like to contribute as my various books about computers and how they got that way are pretty well accepted. Cgordonbell (talk) —Preceding undated comment added 09:12, 14 April 2011 (UTC).

No you are very welcome as an editor. Some editors, including Crispmuncher, can be a little impatient with new users. I've asked him to comment on your changes instead of simply reverting them. Let's wait for his reply. Cheers and welcome, —Ruud 20:24, 14 April 2011 (UTC)

Please stay. Since you were there at the time these things happened, we would be fools to ignore you. Our problem is that the principle people will always remember things from a personal viewpoint and the temptation to introduce bias into the the WP article is always present. I'm assuming good faith on your part but many other editors on WP don't act in good faith, so we have to remain vigilant. Since those of us who were not there don't know the truth first hand, we have to rely on multiple testimonies and try to sift through them as best we can. Solutions to the potential bias problem: 1) make your edits with references and other editors will make judgements according to those references. or 2) make suggestions on this talk page (preferably with references) and other editors will make a similar judgement. It's well known that WP articles contain many mistakes but the hope is that by providing references (which you are doing) we provide a way of checking the truth of what is in the article and that we will eventually converge on the truth.

Reading your changes about Viehe again, I can see that you are trying to say that he invented a form of logic gate using magnetic cores and that he wasn't trying to invent memory. However, it is easy to read those same sentences as though you are trying put him down. Perhaps a slight rewording along the lines that Viehe invented logic gates based on magnetic cores and that Forrester further refined them into memory. That way, both parties are given credit for their respective parts.  Stepho  (talk) 21:44, 14 April 2011 (UTC)

The Viehe issue can be best resolved by separating the two uses of core: for memory and for doing logic. See the SRI site I gave for some of the impressive magnetic logic systems. Also read Viehe and Wang patents about intent. I have no idea how big the magnetics logic industry got or how many and what systems or who built with them. We have the opportunity to make the history right and credit those who did this impressive work. While I again, refer to the title of the entry that should be changed or as a minimum, the new section about magnetic cores for logic design could grow as we get the work and systems. Thuse, a new section on the The Use of Magnetic Cores for Building Digital Systems (c1950?-1960?) would be a great addition AND it could end with a question: Did any of Viehe's or Wang's work on magnetic cores for creating magnetic logic system have any impact on Forrester's co-incident current core memory invention? Note, this is why I would like Forrester's email to me to somehow get entered. I can get a letter or ask him if that quote has been printed. Also, it would be his recollection and we all agree with 60 year old recollections are suspect. Mine are useless here because I didn't do the work. Forrester's are important and left to the reader to believe or not. Bill Papian statement that they, along with others, were all looking at cores. I will refrain from opening up the Rajchman and IBM cans of worms re. their claim on the Core Memory Invention since we have enough worms now. Once we separate the two issues, we could add a few more players who got into the controversy that ended with the awarding of $13M for the Forrester patent. There is more material in the IEEE Annals and other places, but I don' think more space is warranted to go down to the next level.

Stating that Forrester refined Viehe is completely untrue. If you read Forrester's account, he was looking for the right element as an intersection of x,y,z array first attempting gas discharge, and maybe capacitors. The two efforts are completely unrelated except they both used properties of magnetic cores... a ring counter is a 1D structure and like Wang with no way to scale to store an array of bits. Neither were even 2D, and the Walker patent that was cited because it was 2D is another red herring even though cores were at the x-y intersection, they served as transformers to carry AC or signals for telephony.Cgordonbell (talk) 00:01, 15 April 2011 (UTC)

I stand corrected (re my refined comment above). Good thing somebody is checking my work.  Stepho  (talk) 04:51, 15 April 2011 (UTC)

Please do not take any of this personally. It is not intended as an attack on your integrity. Your reaction is fairly normal but sadly, I still haven't seen any way of raising potential CoI issues so that the point is made robustly but without any attack being construed, intentional or not. As we have both noted you are not directly involved here, but as a personal acquaintance with people that are that is enough to raise potential problems in and of itself. This does not suppose an intentional distortion of fact, simply that anyone would naturally wish their friends portrayed in a positive light. No-one is doubting that you have a lot to potentially offer this article and being put off by this would represent a great loss to the project, but extreme caution needs to be exercised to ensure absolutely that the article retains its integrity. That is ultimately our over-riding interest.

It is important also to recognise Wikipedia's policies and indeed weaknesses. One fundamental weakness is that experts are not and indeed cannot be recognised in respect of their personal edits here. Identities are not confirmed and ultimately anyone can claim to be anyone. I have no doubt that you are who you say you are, but those policies stand and indeed have to stand: otherwise anyone can assert anything they like with a simple "I am _____" and the project loses all credibility at a stroke. Instead we need published sources for material that the next reader or editor can verify for themselves.

Personal testimony and personal emails do not satisfy that criterion, and have to be challenged to protect the project as a whole. Aside from the identity problem (in the general rather than the specific case) memories of events 60 years ago can be fallible, and even those directly involved in a project may not have been in a position to witness any specific event, gain a perspective of the project as a whole, or an intimate perspective as to what others were doing at the time. I've seen this myself with the project my third year undergrad project was a small part of: I've read accounts of it where at times I think "that isn't right" but I also recognise that I was not privy to everything that went on.

As for the Viehe work, this was fundamentally different to coincident current memory. However, from personal memory he did cite ring counters as an example: not huge, and not random-access, but still a magnetic core memory. I don't have references to hand but have found an index to what I believe to be the relevant paper - obtaining it is likely to take weeks though. It may have been much of a dead end in terms of a primary store but a blanket assertion that it has "nothing to do with the use of core memory to store information" is distorting: that is the whole point of a ring counter after all.

I agree with you regarding the comment about Wang getting the patent behind Woo's back. That should be cited if it is true at all, and if as I suspect it can't it should be snipped with extreme prejudice. Crispmuncher (talk) 22:53, 14 April 2011 (UTC)

Dear Rudd, Crispmuncher, and Stepho, Thank you for restoring and correcting my additions. Hopefully the Woo comment can be deleted or kept if a citation exists. I still would love to propose this section. If any of you feel this way, please insert it perhaps at the end so that it can be more fully developed.

The Use of Magnetic Cores for Building Digital Systems (c1950?-1960?) Viehle appears to be the first to describe the use of magnetic core transformers for doing logic design. By 1961, magnetic core logic systems included "a control system for the Canadian National Railroad Hump Yard in Toronto because semiconductors could not withstand lightning surges. They controlled a portion of the New York subway lines to assure safe operation against electrical transients." SRI also stated "Crane began the work the mid-1950s at RCA Laboratories (now SRI International Sarnoff) and continued after he joined SRI in 1956. He introduced the basic all-magnetic logic approach at the Fall Joint Computer Conference in 1959. In 1961, the SRI magnetics group demonstrated an Air Force-funded multiaperture logic system that was the world's first, and only, all-magnetic computer." Companies included AMP who commericalized the SRI technology.

BTW: Hew Crane died a few years ago and unfortunately only a rambling audio tape is available as he had Alzheimer's. The SRI project had several great contributors including Charlie Rosen. These guys were all contemporaries of Doug Englebardt. Cgordonbell (talk) 07:05, 15 April 2011 (UTC)

I remember core memory shift registers in a Morse code sending device. The concept of cores for logic also appears in Ken Olsen's MS thesis.

For that matter, core memory is in fact a logic device, for the common coincident-current structure. Each core is clearly a 3-input AND gate (x, y, and inhibit). A little different from the usual logic because it has ternary inputs (+, 0 and - current), but the principle applies. Paul Koning (talk) 15:45, 3 February 2023 (UTC)

References

Strange combination of images

It's odd to see those two images combined in the photo in the "Other forms of core memory" section. While it is very attractive to combine an overview photo with a zoomed-in detail of a small piece, these are not the same core memory types. The main photo is CDC 6000 memory, which has 5 (!) wires per core -- X, Y, two separate inhibit lines, and sense. So while the close-up illustrates the "other forms" subject, the main image doesn't. Paul Koning (talk) 20:34, 8 May 2012 (UTC)

1. Numbered list item

Link to Magnetic logic

User GliderMaven added text to a sentence including a link to Magnetic logic, an article created today by GliderMaven. I reverted, commenting: built run-on sentence to hump own unremarkable new article Magnetic logic. GliderMaven reasserted the change, saying: It's not that I started the article, the point is that the wider context is magnetic logic.

The article on magnetic logic is unremarkable. It is a short essay on how, by combinatorial winding of ferrite cores, one could achieve Boolean functions (as, of course, one can by combinatorial wiring of light switches). It asserts that a complete computer was built on this device, though it was not commercially successful. Correct me if I am mistaken that the core memories described in the current article did not use "magnetic logic" of more complexity than that the intersection of voltages in several dimensions selected the bits to be read and written. Attracting readers to Magnetic logic is the only conceivable point of the change. But perusing that article will add nothing to the understanding of the current article.

To my other original point, the resulting sentence is not English: "It is based on magnetic logic, tiny magnetic toroids (rings), the cores, through which wires are threaded to write and read information." It is a run-on sentence. And the best solution is to roll it back again. Spike-from-NH (talk) 21:17, 26 December 2012 (UTC)

I find that in Wikipedia, the best solution is usually for people to follow the actual guidelines and policies of Wikipedia. The appropriate guideline on what should be linked is here: Wikipedia:Link#What_generally_should_be_linked. Notably, there's no restriction to linking to 'unremarkable articles' and almost all new articles are highly likely to be not particularly high quality, articles take time to improve. Indeed the policy encourages linking to articles that don't even exist yet, and hence are maximally unremarkable.

I would encourage you to read and stick to the policies and guidelines, they're usually written like that for a reason (like it makes Wikipedia a lot easier to write and expand).GliderMaven (talk) 23:50, 26 December 2012 (UTC)

We are talking about this edit which changed "It uses tiny magnetic toroids..." to "It is based on magnetic logic, tiny magnetic toroids..." in the second sentence of the lead. I don't recall the concept "magnetic logic" being tied to the topic of this article, and I'm pretty sure that any minor connection that might be demonstrated in a reliable source would not warrant a mention in the lead (which of course is a summary of the important parts of the article). Johnuniq (talk) 01:19, 27 December 2012 (UTC)

I don't think you quite understand; this isn't a minor connection. Each magnetic core memory bit is just a bistable built from the principles of magnetic logic. The article further down very obliquely and vaguely mentions that core memory is part of a general family; specifically, the family it's part of is magnetic logic.

It's quite normal to mention the overall family that something is a part of in the lead; in fact there's something wrong if you've not been able to do this, as here.GliderMaven (talk) 02:15, 27 December 2012 (UTC)

There's a slightly painful, but fairly detailed video here: [4] that talks about magnetic logic. Also [5] is shorter and shows it working in practice.GliderMaven (talk) 02:15, 27 December 2012 (UTC)

Thanks but I'm not fond of videos and I don't see how anything there would be relevant here. For the record, I am well aware that there is a connection between magnetic core memory and digital logic—my comment above was intended to say that a reliable source would be needed to establish that common usage has regarded core memory as a kind of magnetic logic such that the connection should be mentioned in this article. Of course core memory is a bunch of magnetic logic devices (bistable latches), but the question to be answered with a source is whether that connection was commonly used in describing core memory (it's that connection that I don't recall seeing). Johnuniq (talk) 05:40, 27 December 2012 (UTC)

I hardly know where to begin. The first youtube video is a reliable source about magnetic logic, showing how the pulses are used to set and read from magnetic cores, and you're refusing to check it. You've also just admitted that it is magnetic logic, and yet you don't want the article to say that. Bureaucracy much? And Wikipedia isn't even about 'usage', we don't restrict ourselves to the phrases that are common; the words we use are intended to communicate meaning to the reader so that they can understand the topic. The topic here is the use of magnetic cores for storing bits of data by using pulses to set and read from them via windings. Magnetic cores used in that way come under the general umbrella of magnetic logic; and that's all there is to it really, I'm genuinely baffled by this resistance to adding a simple link to an another, entirely relevant article.GliderMaven (talk) 12:14, 27 December 2012 (UTC)

The most common form of core memory clearly implements a logic function: coincident current addressing amounts to an AND operation of the row and column signals. And the sense line implements the OR of all the cores (of which only one is selected). I suspect it isn't often described that way, but the fact that square loop cores implement logic functions is relevant not just to magnetic computers and magnetic shift registers, but also to core RAM as well as "rope memory" core ROM. So I would argue it makes sense to tie the logic and the memory articles together with a clear statement of why that is correct. It would serve to illuminate a property of core memory that's fundamental to how it works but rarely mentioned. Paul Koning (talk) 22:22, 21 January 2017 (UTC)

An Wang's Core Shift Register

In the developers sub-section of the History section of this article, it describes An Wang developing a core shift register of o(50) bits. ??? What does the o represent? Is this a typo or am I just misunderstanding the text? BlueScreen (talk) 09:47, 14 July 2013 (UTC)

Perhaps "order of" -- an obscure way of saying "approximately". Paul Koning (talk) 22:23, 21 January 2017 (UTC)

Reading and Writing

This is an excellent article which doesn't require much technical knowledge to understand, apart from a basic knowledge of computers, and clearly explains everything until the end of the last paragraph in this section. "...For example, a value in memory could be read with post-increment almost as quickly as it could be read; the hardware simply incremented the value between the read phase and the write phase of a single memory cycle (perhaps signalling the memory controller to pause briefly in the middle of the cycle). This might be twice as fast as the process of obtaining the value with a read-write cycle, incrementing the value in some processor register, and then writing the new value with another read-write cycle."

Since the term "post-increment" is introduced without explanation and "incremented the value" doesn't state what "incrementing" means in this context, or what value is being incremented, I found this paragraph impenetrable. That also means I can't attempt to improve it myself. Chris.Bristol (talk) 07:29, 18 November 2016 (UTC)

External links modified

Hello fellow Wikipedians,

I have just modified one external link on Magnetic-core memory. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

• Added archive https://web.archive.org/web/20111118002956/http://www.cs.ubc.ca/~hilpert/e/coremem/index.html to http://www.cs.ubc.ca/~hilpert/e/coremem/index.html

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 17:50, 12 January 2018 (UTC)

Incorrect image

A 10.8×10.8 cm plane of magnetic core memory with 64 x 64 bits (4 Kb), as used in a CDC 6600. Inset shows word line architecture with two wires per bit

The image and caption here, from the other forms of core memory section, is wrong. The image is a composite of two others:

• background: a CDC 6600 core memory card -- close inspection of the image at highest resolution reveals a classic 4-wire per core arrangement, cores in a diamond lattice with X, Y, inhibit and sense windings.
• inset: a microphoto of a core memory of unknown provenance -- clearly shows 2 wires per core, but there may be a third. Compare with my photos of an MM8E core plane. That plane has 3 wires per core, X, Y and combined sense/inhibit, but in the microphoto, it looks extremely similar, even to the colors of the wires.

I believe the image was created and used with the best of intentions, but the following errors are apparent:

• The inset is not a magnified view of this background.
• It is doubtful that the image represents a word-line architecture.

Therefore, this illustration does not belong in the section on other forms of core memory and I would recommend that this image not be used in Wikipedia. Douglas W. Jones (talk) 19:24, 6 March 2019 (UTC)

You can't quite tell at the resolution of the photo, but 6600 main memory arrays are 5 wire, not 4 wire. Instead of the usual inhibit wire run through all the cores of the plane, it uses horizontal and vertical inhibit wires, each run through 1/4th of the plane. You can see the PCB traces for these at the bottom and right edges of the core plane.

You can see this described in detail in CDC document 60147400A "6600 Training Manual (Jun65)" available I believe on Bitsavers. Chapter 4 describes the memory; figure 4-1 shows the 5 wires. Paul Koning (talk) 15:53, 3 February 2023 (UTC)

size of cores

The reference "IBM's 360 and early 370 systems", page 206, says "...most cores were 30-50 mil ..." and "... October 1966 ... 13-21 mil". So the larger ones were 0.05 inches and the smaller ones were 0.013 inches. Bubba73 ^{You talkin' to me?} 00:56, 8 December 2019 (UTC)

Thanks. I haven't seen the reference and did not want to correct the IP's unexplained edit which caused a problem in the template. Those numbers seem impossibly small and less than I can remember seeing, but on the other hand, 0.05 inches is 20 cores/inch which does seem right. Here are some correct usages of {{convert}} that could be used by someone who has seen the ref to replace what is there:

• {{convert|0.013|inch|mm}} → 0.013 inches (0.33 mm)
• {{convert|0.05|inch|mm}} → 0.05 inches (1.3 mm)
• {{convert|0.013|to|0.05|inch|mm|sigfig=2}} → 0.013 to 0.05 inches (0.33 to 1.3 mm)

Johnuniq (talk) 01:49, 8 December 2019 (UTC)

The cores used in SAGE were larger. The reference says that the 50 mil ones would fit through the hole of a core in SAGE, but doesn't give the dimensions. And that last figure was for 1966 - they might have gotten smaller by the end of their production. Bubba73 ^{You talkin' to me?} 01:59, 8 December 2019 (UTC)

I've measured large numbers of cores from core memories in old computers. See Core Memory for details and photos. The oldest memory I measured, probably dating from around 1960, had cores 1.96mm in diameter. The newest, from 1977 (but designed in 1974) had cores 0.46mm in diameter. In terms of packing density in the core plane, these represent a range from one core per 6.45mm² to one core per 0.13mm². I have no doubt that somewhat smaller cores were used in the highest density core memories introduced at the very end, and I'd be shocked if some of the early prototypes from the late 1950's weren't bigger. Douglas W. Jones (talk) 19:39, 18 July 2021 (UTC)

Not really related to magnetic logic

I'm not a fan of the Feb 2, 2020 edits saying that core memory is part of magnetic logic which bridged the gap between vacuum tubes and semiconductors. Magnetic logic is considered distinct from core memory and magnetic logic "never achieved commercial importance"(ref: "Memories that Shaped an Industry", p41). IBM considered magnetic logic in 1957 but rejected it (p171). Looking at historical computers, there wasn't a gap between vacuum tubes and semiconductors that needed to be bridged; semiconductors (specifically diodes) were heavily used in vacuum tube computers (See 1961 1961 BRL report, for instance). Since the article's History section doesn't have any references and expresses a point of view I haven't seen expressed elsewhere, I'm going to call WP:OR on it. KenShirriff (talk) 23:17, 20 April 2020 (UTC)

I don't know much about electronics, but I think you are right. Magnetic logic is also relevant. It says that the Elliott 803 used magnetic core for some of its logic, but the 803 used transistors. Magnetic logic was not a step between tubes and transistors. Bubba73 ^{You talkin' to me?} 01:04, 21 April 2020 (UTC)

Gordon Bell disagrees with you. Look above for comments by Bell concerning Viehe.  Stepho  talk  10:11, 21 April 2020 (UTC)

"Patented" vs. filing for a patent

This article is wrong when it states that Frederick Viehe patented magnetic core memory in 1947. He merely applied for a patent at that time – as his patent shows:

Viehe, Frederick W. "Memory transformer"
U.S. patent no. 2,992,414 (filed: May 29, 1947 ; issued: July 11, 1961)
https://pdfpiw.uspto.gov/.piw?docid=02992414

The distinction is important because – as the article correctly states – three other groups were working on the same form of memory at the same time. And none of them were aware of Viehe's work … because patents are published whereas applications for patents are not published:

"Applications for patents, which are not published or issued as patents, are not generally open to the public, … "
https://www.uspto.gov/patents-getting-started/general-information-concerning-patents

Therefore the fact that Viehe had applied for a patent but had not yet received a patent is important because it explains how three teams of inventors could fail to know of Viehe's work.

VexorAbVikipædia (talk) 05:23, 11 September 2020 (UTC)

The secondary source says "patented in 1947" and the article follows that. USPTO filings and documents are primary sources and almost impossible to be used as sources because of their frequent errors and the difficulty of interpreting them. Perhaps you can find some other secondary source that better explains the sequence of events. EEng 05:36, 11 September 2020 (UTC)

Hyphenate name?

@Kwamikagami: In 2011, this article was moved from Magnetic core memory to Magnetic-core memory, with the comment "it's the cores which are magnetic". But that is not common usage. According to Google ngrams, in the early days (1947-1955), usage was pretty evenly split, but since then, the spelling without the hyphen has been about 4x more common. Out of the 304 US patents whose titles mention magnetic core memory, only 9 (3%) use a hyphen. This WP article uses the two forms about equally often. I understand the convention of using hyphens in compound modifiers, but that is far from universal, and is in fact becoming less common. In any case, I believe that the MOS prefers common usage over prescriptive grammar usage. --Macrakis (talk) 17:41, 18 November 2020 (UTC)

@Chris the speller: This user is an expert on the use of hyphens. Bubba73 ^{You talkin' to me?} 20:11, 18 November 2020 (UTC)

As far as the hyphen being less common now, I think that is a matter of ignorance. People don't hear the hyphen when it is spoken and they don't know how to write proper English. Bubba73 ^{You talkin' to me?} 21:04, 18 November 2020 (UTC)

Since the article was happily hyphenated for nine years, I would tend to leave it hyphenated. The Google ngram shows about 34% hyphenated; if it were about 5%, I would seriously consider making the article unhyphenated. There was a time when many people knew what a magnetic core was, and understood how a bunch of cores were used to make up a computer's memory, but now why not give younger or less technical readers all the help they can get, and toss them a hyphen? They should understand that the magnetic state of each core was what made it work, and not magnetism of the array as a whole. This decision isn't a slam dunk, but it's not absolutely clear that it's wrong to hyphenate it, or that the hyphen will startle or confuse readers. It's always good to consider how an article's readers will be affected. Hyphenation of compound modifiers is not yet deprecated in general. Come back in 50 years, maybe. I'm about 80% in favor of the hyphen. Chris the speller ^yack 21:26, 18 November 2020 (UTC)

As for the 3% of patents, keep in mind WP:SSF. Chris the speller ^yack 21:29, 18 November 2020 (UTC)

Thank you for your insightful input. Bubba73 ^{You talkin' to me?} 21:41, 18 November 2020 (UTC)

Common usage is for things like variant terms, not formatting. There may be a title that doesn't have capitals, or isn't italicized, but we still capitalize and italicize them on WP. Same with hyphens. If general MOS's start to say that hyphens are old-fashioned, then we might change our MOS to match, but regardless we should follow it so we're consistent between articles. That's the whole point. — kwami (talk) 22:42, 18 November 2020 (UTC)

In "magnetic-core memory", "magnetic-core" is a compound adjective or modifier, needing a hyphen. Without a hyphen, "magnetic core memory" says "core memory that is magnetic". But that is not what it is - it is memory made of magnetic cores (note no hyphen there - not a compound modifier). Bubba73 ^{You talkin' to me?} 23:32, 18 November 2020 (UTC)

As I said in my initial comment, I'm aware of the compound modifier rule. Heck, I even have Fowler and Strunk and White within arm's reach. However, modern usage seems to have moved on.

I will continue this discussion on Wikipedia:Manual_of_Style, as kwami suggests. --Macrakis (talk) 22:52, 19 November 2020 (UTC)

Please ping me if you do. Bubba73 ^{You talkin' to me?} 04:14, 21 November 2020 (UTC)

Strunk & White don't even know what a passive is! I'd be leery of relying on them for anything. — kwami (talk) 03:15, 21 November 2020 (UTC)

I have Strunk & White, Turabian, and the APA publication manual (and access to a language professor). S&W started in 1959; there have been many editions, but I don't know how many changes. Bubba73 ^{You talkin' to me?} 04:14, 21 November 2020 (UTC)

Kwami, I'm aware of Pullum's critique. I cited Fowler and S(&W) just to say that I'm familiar with traditional style manuals. After all, both were written a century ago. --Macrakis (talk) 18:12, 21 November 2020 (UTC)

Cost of 1103

DRAM cost citation needed

The cent per bit point is mentioned all over the place.

The best reference I can find is here in a piece by Gordon Moore, the founder of Intel.

https://www.jstor.org/stable/20013439?seq=12

2A00:23C6:CE0D:DD01:FC1C:D3C5:980A:335A (talk) 08:51, 13 November 2023 (UTC)